Used Juniper Routers E Series ERX1410
Small Form Factor Pluggable OC3 Short Reach (SR) MM Optic Module - 2Km
SFP-OC3-SR
1000Base-T GE SFP for all E-Series GE IOAs that accept pluggable interfaces (uses Cat 5 cable with RJ45 connector).
RX-GET-SFP
4-port OC3/STM1 or 1-port OC12/STM4 POS Line Module: supports (4) OC3/STM1 POS or (1) OC12/STM4 POS interface(s) with 128MB of memory. Requires either an OC3/STM1 IOA or OC12/STM4 IOA. Supports 1:1, 2:1, 3:1, 4:1, and 5:1 line module redundancy.
ERX-O3O12P-MOD
Service Module with 256MB: provides all of the capabilities of the existing Tunnel Service with increased session scaling (via the 256MB) and performance enhancements for increased throughput. Also includes support for NAT and firewall capabilities.
ERX-IPSERV-MOD
4-port OC3/STM1 or 1-port OC12/STM4 or 4-port T3/DS3 ATM Line Module: supports (4) OC3/STM1 ATM or (1) OC12/STM4 ATM or (4) T3/DS3 ATM interface(s) with 256MB of memory. Requires an OC3/STM1, OC12/STM4, or T3/DS3 IOA. Supports 1:1, 2:1, 3:1, 4:1, and 5:1
ERX-O3O12A-MOD
IPSec Line Module w/encryption. Includes a license for 2,500 IPSec tunnels with JUNOSe 4.0, 4.1 and 5.0 and a license for 10 IPSec or Secure Remote Access tunnels with JUNOSe 5.1 or higher.
ERX-IPSECURE-MOD
8-Port 10/100 FE IOA: provides (8) 10/100 Fast Ethernet physical ports with RJ-45 connections. Works with the GE/FE-8 and ERX-GEFE256M-MOD line modules.
FE-8_I/O
ATM-based Combo card: Ships with 256MB of memory. Requires the 2xATM/1xGE IOA (ERX-2OC3GE-IOA) with pluggable SFP adapters. Line module redundancy is not supported.
ERX-OCXGE-MOD
4-port Unchannelized T3/DS3 ATM IOA: provides (4) physical unchannelized T3/DS3 ports with BNC connectors. Works with the OC3/OC12-ATM and ERX-OCXA256M-MOD line modules.
ERX-4T3ATM-IOA
8-Port 100Base-FX IOA: provides (8) 100 Fiber Fast Ethernet physical ports with SFP optics. Works with the ERX-GEFE256M-MOD line module. SFP optics (RX-FXMM-SFP and RX-FXSM-SFP) ordered separately
ERX-8FXSFP-IOA
4-port OC3/STM1 MM IOA: provides (4) multimode OC3/STM1 SC full duplex physical ports supporting distances up to 2 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.
OC3-4MM_I/O
1-port OC12/STM4 MM IOA: provides (1) multimode OC12/STM4 SC full duplex physical port supporting distances up to 2 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.
OC12-MM_I/O
4-port OC3/STM1 LH IOA: provides (4) single mode OC3/STM1 SC full duplex physical ports supporting distances up to 40 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.
OC3-4LH-I/O
4-port OC3/STM1 SM IOA: provides (4) single mode OC3/STM1 SC full duplex physical ports supporting distances up to 15 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.
OC3-4SM_I/O
1-port OC12/STM4 LH IOA: provides (1) single mode OC12/STM4 SC full duplex physical port supporting distances up to 40 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.
OC12-LH-I/O
1-port OC12/STM4 SM IOA: provides (1) single mode OC12/STM4 SC full duplex physical port supporting distances up to 15 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.
OC12-SM_I/O
4-port OC3/STM1 MM IOA with APS: provides (4 - 4 active + 4 standby) OC3/STM1 multimode LC full duplex physical ports. Supports distances up to 2 kilometers. Works with the ERX-OCXA256M-MOD, OC3/OC12-ATM, and OC3/OC12-POS line modules.
ERX-OC3M-APS-IOA
1-port OC12/STM4 MM IOA with APS: provides (1 = 1 active + 1 standby) OC12/STM4 multimode SC full duplex physical ports. Supports distances up to 2 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.
ERX-OC12MM-A-IOA
4-port OC3/STM1 SM IOA with APS: provides (4 = 4 active + 4 standby) OC3/STM1 single mode LC full duplex physical ports. Supports distances up to 15 kilometers. Works with the ERX-OCXA256M-MOD, OC3/OC12-ATM, and OC3/OC12-POS line modules.
ERX-OC3S-APS-IOA
2+2 ATM OC3 + 1+1 Port GE IOA: supports up to (4) pluggable OC3 SFP adapters (SFP-OC3-SR, SFP-OC3-IR, SFP-OC3-LR). Supports up to (2) pluggable GE SFP adapters (RX-550M-SFP, RX-10KM-SFP, RX-70KM-SFP). Works with ERX-OCXGE-MOD line module.
ERX-2OC3GE-IOA
1-port OC12/STM4 SM IOA with APS: provides (1 = 1 active + 1 standby) OC12/STM4 single mode SC full duplex physical ports. Supports distances up to 15 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.
ERX-OC12SM-A-IOA
4-port OC3/STM1 or 1-port OC12/STM4 POS Line Module: supports (4) OC3/STM1 POS or (1) OC12/STM4 POS interface(s) with 128MB of memory. Requires either an OC3/STM1 IOA or OC12/STM4 IOA. Supports 1:1, 2:1, 3:1, 4:1, and 5:1 line module redundancy.
OC3/OC12-POS
Service Module with 256MB: provides all of the capabilities of the existing Tunnel Service with increased session scaling (via the 256MB) and performance enhancements for increased throughput. Also includes support for NAT and firewall capabilities.
ERX-SERVICE-MOD
4-port OC3/STM1 or 1-port OC12/STM4 or 4-port T3/DS3 ATM Line Module: supports (4) OC3/STM1 ATM or (1) OC12/STM4 ATM or (4) T3/DS3 ATM interface(s) with 256MB of memory. Requires an OC3/STM1, OC12/STM4, or T3/DS3 IOA. Supports 1:1, 2:1, 3:1, 4:1, and 5:1
ERX-OCXA256M-MOD
1-port 2KM FE SFP Adapter: provides (1) small form-factor pluggable (SFP) Fast Ethernet multimode (2 KM FX) physical port. SC connector type.��_ Works with ERX-8FXSFP-IOA.
RX-FXMM-SFP
1-port 10KM FE SFP Adapter: provides (1) small form-factor pluggable (SFP) Fast Ethernet single mode (10 KM LX) physical port.��_ SC connector type.��_ Works with ERX-8FXSFP-IOA.
RX-FXSM-SFP
1-port 550M GE SFP Adapter: provides (1) small form-factor pluggable (SFP) Gigabit Ethernet multimode (550 M) physical port with an LC full duplex connection. Works with ERX-GIGESFP-IOA.
RX-550M-SFP
1-port 10KM GE SFP Adapter: provides (1) small form-factor pluggable (SFP) Gigabit Ethernet single mode (10 KM) physical port with an LC full duplex connection. Works with ERX-GIGESFP-IOA.
RX-10KM-SFP
1-port 70KM GE SFP Adapter: provides (1) small form-factor pluggable (SFP) Gigabit Ethernet single mode (70 KM) physical port with an LC full duplex connection. Works with ERX-GIGESFP-IOA.
RX-70KM-SFP
Small Form Factor Pluggable OC3 Long Reach (LR) SM Optic Module - 40Km
SFP-OC3-LR
Small Form Factor Pluggable OC3 Inermediate Reach (IR) SM Optic Module - 15Km
SFP-OC3-IR
Small Form Factor Pluggable supporting 1000BASE-EX Gigabit Ethernet Optic Module, 40km.
SFP-GE40KM
Small Form Factor Pluggable Module supporting 1000BASE-BX, UPLINK, at 40km (TX1310nm / 1550nm). A single fiber is used for both transmit and receive. UPLINK SFP must be matched with DOWNLINK SFP.
SFP-GE40KT13R15
Small Form Factor Pluggable module supporting 1000BASE-BX10, UPLINK, at 10km (TX1310nm / RX1550). A single fiber is used for both transmit and receive. UPLINK SFP must be matched with DOWNLINK SFP.
SFP-GE10KT13R15
Small Form Factor Pluggable module supporting 1000BASE-BX, DOWNLINK, at 40km. (TX1550nm / RX1310nm). A single fiber is used for both transmit and receive. UPLINK SFP must be matched with DOWNLINK SFP.
SFP-GE40KT15R13
Small Form Factor Pluggable module supporting 1000BASE-BX10, DOWNLINK, at 10km (TX1490nm / RX1310nm). A single fiber is used for both transmit and receive. UPLINK SFP must be matched with DOWNLINK SFP.
SFP-GE10KT14R13
Small Form Factor Pluggable module supporting 1000BASE-BX10, DOWNLINK, at 10km (TX1550nm / RX1310nm). A single fiber is used for both transmit and receive. UPLINK SFP must be matched with DOWNLINK SFP.
SFP-GE10KT15R13
Small Form Factor Pluggable module supporting 1000BASE-BX10, UPLINK, at 10km (TX1310nm / RX1490). A single fiber is used for both transmit and receive. UPLINK SFP must be matched with DOWNLINK SFP.
SFP-GE10KT13R14
