Used Juniper Routers E Series E120
Small Form Factor Pluggable OC3 Short Reach (SR) MM Optic Module - 2Km
SFP-OC3-SR
E320 (half-height) 4-port GE IOA (requires pluggable GE SFP transceivers).
ES2-GE4S1-IOA
E320 (half-height) 8-port GE IOA (requires pluggable GE SFP transceivers).
ES2-GE8S1-IOA
E320 320Gb switch fabric module (SFM). Supported in the E320 and E120 chassis
ES2-320G-SFM
E320 320Gb switch route processor (SRP). Supported in the E320 and E120 chassis
ES2-320G-SRP
E320 (half-height) 8-port OC3/STM1 ATM IOA (requires pluggable OC3/STM1 SFP transceivers).
ES2-8OC3AS1-IOA
E320 (half-height) 2-port OC12/STM4 ATM IOA (requires pluggable OC12/STM4 SFP transceivers).
ES2-2OC12AS1-IOA
E320 (half-height) 2-port OC12/STM4 POS IOA (requires pluggable OC12/STM4 SFP transceivers).
ES2-2OC12PS1-IOA
E320 (half-height) 1-port OC48/STM16 POS IOA (requires pluggable OC48/STM16 SFP transceiver).
ES2-OC48PS1-IOA
E320/E120 10G Access line module (LM10A).��_ Support for Ethernet, and Redundancy IOAs only (ES2-GE8S1-IOA, ES2-REDUNDS1-IOA, ES2-10GES2-IOA, ES2-GE20S3-IOA)
ES2-10GACS3-MOD
E320/E120 10G Advanced Services Line Module. Deployable as a high scale access or uplink module. Support for Ethernet, and Redundancy IOAs only (ES2-GE8S1-IOA, ES2-REDUNDS1-IOA, ES2-10GES2-IOA, ES2-GE20S3-IOA)
ES2-10GACS4-MOD
2-port, wire-rate, 10GE IOA for use with the E320 10Gb line modules (ES2-10GUPS2-MOD, ES2-10GACS3-MOD, ES2-10GACS4-MOD). This IOA has 2 physical ports for 1+1 port-level redundancy and uses pluggable transceivers (XFPs).
ES2-10GES2-IOA
Full height, 20GE IOA for use with the E320 10Gb access line module (ES2-10GACS3-MOD). This IOA has 20 physical ports for 10+10 port-level redundancy or 20x1G oversubscribed access. SFP optics ordered separately. Requires JUNOSe 9.0 or later.
ES2-GE20S3-IOA
1000Base-T GE SFP for all E-Series GE IOAs that accept pluggable interfaces (uses Cat 5 cable with RJ45 connector).
RX-GET-SFP
OC12/STM4 pluggable transceiver (SFP) - long range.
SFP-OC12-LR
OC12/STM4 pluggable transceiver (SFP) - short range.
SFP-OC12-SR
OC12/STM4 pluggable transceiver (SFP) - intermediate range.
SFP-OC12-IR
10GE short reach multi-mode pluggable interface
XFP-10GE-SR
10GE XFP pluggable transceiver; singlemode 1310nm 10km reach
XFP-10GE-LR
1-port 2KM FE SFP Adapter: provides (1) small form-factor pluggable (SFP) Fast Ethernet multimode (2 KM FX) physical port. SC connector type.��_ Works with ERX-8FXSFP-IOA.
RX-FXMM-SFP
1-port 10KM FE SFP Adapter: provides (1) small form-factor pluggable (SFP) Fast Ethernet single mode (10 KM LX) physical port.��_ SC connector type.��_ Works with ERX-8FXSFP-IOA.
RX-FXSM-SFP
1-port 550M GE SFP Adapter: provides (1) small form-factor pluggable (SFP) Gigabit Ethernet multimode (550 M) physical port with an LC full duplex connection. Works with ERX-GIGESFP-IOA.
RX-550M-SFP
1-port 10KM GE SFP Adapter: provides (1) small form-factor pluggable (SFP) Gigabit Ethernet single mode (10 KM) physical port with an LC full duplex connection. Works with ERX-GIGESFP-IOA.
RX-10KM-SFP
1-port 70KM GE SFP Adapter: provides (1) small form-factor pluggable (SFP) Gigabit Ethernet single mode (70 KM) physical port with an LC full duplex connection. Works with ERX-GIGESFP-IOA.
RX-70KM-SFP
Small Form Factor Pluggable OC3 Long Reach (LR) SM Optic Module - 40Km
SFP-OC3-LR
Small Form Factor Pluggable OC3 Inermediate Reach (IR) SM Optic Module - 15Km
SFP-OC3-IR
Small Form Factor Pluggable supporting 1000BASE-EX Gigabit Ethernet Optic Module, 40km.
SFP-GE40KM
Small Form Factor Pluggable Module supporting 1000BASE-BX, UPLINK, at 40km (TX1310nm / 1550nm). A single fiber is used for both transmit and receive. UPLINK SFP must be matched with DOWNLINK SFP.
SFP-GE40KT13R15
Small Form Factor Pluggable module supporting 1000BASE-BX10, UPLINK, at 10km (TX1310nm / RX1550). A single fiber is used for both transmit and receive. UPLINK SFP must be matched with DOWNLINK SFP.
SFP-GE10KT13R15
Small Form Factor Pluggable module supporting 1000BASE-BX, DOWNLINK, at 40km. (TX1550nm / RX1310nm). A single fiber is used for both transmit and receive. UPLINK SFP must be matched with DOWNLINK SFP.
SFP-GE40KT15R13
Small Form Factor Pluggable module supporting 1000BASE-BX10, DOWNLINK, at 10km (TX1490nm / RX1310nm). A single fiber is used for both transmit and receive. UPLINK SFP must be matched with DOWNLINK SFP.
SFP-GE10KT14R13
Small Form Factor Pluggable module supporting 1000BASE-BX10, DOWNLINK, at 10km (TX1550nm / RX1310nm). A single fiber is used for both transmit and receive. UPLINK SFP must be matched with DOWNLINK SFP.
SFP-GE10KT15R13
Small Form Factor Pluggable module supporting 1000BASE-BX10, UPLINK, at 10km (TX1310nm / RX1490). A single fiber is used for both transmit and receive. UPLINK SFP must be matched with DOWNLINK SFP.
SFP-GE10KT13R14
